New Products Essays and Term Papers
Last update: September 18, 2014-
Product Life-Cycle Model
Overview The product can be defined as goods, services or both; in the other words it’s anything that satisfies customer need. Each product has its own limited life, however it shares the same aspect and we define the period that the product goes through as the “Product life cycle”. The Product life cycle consist of four stages starting from introduction stage, growth stage, maturity stage and decline stage. At the introduction stage, the product is
Rating:Essay Length: 369 Words / 2 PagesSubmitted: December 8, 2009 -
Retail and Consumer Products
1.1. Supply Chain Risk In the Retail and Consumer Products (RCP) industry, it is critical to have an efficient and effective supply chain. Presenting opportunities and risks, the supply chain is one of the last, best areas from which to reduce costs in a company’s operations. Beyond that, flexible supply chains enable greater connectivity and collaboration between business partners. Done right, this can improve operational effectiveness, customer service and, ultimately, profitability. But with greater connectivity
Rating:Essay Length: 481 Words / 2 PagesSubmitted: December 8, 2009 -
American Psycho: Analysis of Novel and Movie Production
American Psycho: Analysis of Novel and Movie Production American Psycho has been recognized as a brilliant thriller of its time and can legitimately be labeled a scandalous novel. The novel was published in 1991 by the daring author Bret Easton Ellis and was later adapted into a movie production in 2000 by the director Mary Harron. The novel endured nasty criticism to the point of rousing riots and the boycott of the publishing company, Simon
Rating:Essay Length: 1,635 Words / 7 PagesSubmitted: December 8, 2009 -
Managing Product Safety: The Ford Pinto
Shortly after its introduction, and throughout most of the 1970's, the Ford Pinto was one of Ford Motor's best-selling cars, helping to strengthen Ford's market position within the industry. The Pinto was introduced to the market in September 1970 and dubbed by Ford as the "carefree little American car" (Davidson, p 3). The Pinto was Ford's answer to imported subcompact autos, which held 18.4% of the market, a market that had not yet been entered
Rating:Essay Length: 641 Words / 3 PagesSubmitted: December 9, 2009 -
Consumer Product Safety Act
Consumer Product Safety Act The Consumer Product Safety Act states that any company that receives numerous complaints about a products defects must report these claims to the CPSA. According to the CPSA reporting responsibilities belong to manufacturers, importers, distributors and retailers of consumer products. Each is required to notify the Commission if it obtains information which reasonably supports the conclusion that a product fails to comply with a consumer product safety standard or banning regulation.
Rating:Essay Length: 917 Words / 4 PagesSubmitted: December 11, 2009 -
What Is the Right Supply Chain for Your Product?
What is the Right Supply Chain for Your Product? by Marshall L. Fisher Harvard Business Review Reprint 97205 Harvard Business Review MARCH-APRIL 1997 Reprint Number ARIE DE GEUS THE LIVING COMPANY 97203 WALTER KUEMMERLE DEVELOPING GLOBAL NETWORKS BUILDING EFFECTIVE R&D CAPABILITIES ABROAD 97206 KASRA FERDOWS MAKING THE MOST OF FOREIGN FACTORIES 97204 GEORGE S. DAY STRATEGIES FOR SURVIVING A SHAKEOUT 97202 MARSHALL L. FISHER WHAT IS THE HIGH SUPPLY CHAIN FOR YOUR PRODUCT? 97205 JOHN
Rating:Essay Length: 457 Words / 2 PagesSubmitted: December 12, 2009 -
Film and Tv Production Processes
Assessment 1 Film & television (industry Production Practices) The Australian Film and Television Industry has its differences and similarities with other production countries. This becomes evident when we compare the Australian independent process with the big American studio-based process. Each of these systems has it’s advantages and disadvantages, and by looking into the funding structures, above the line personnel, distribution and marketing and the development process we can begin to understand the the differences and
Rating:Essay Length: 949 Words / 4 PagesSubmitted: December 12, 2009 -
Company Description and Production Processes
Company Description and Production Processes Lambeth Custom Cabinets is a small shop that manufactures and sells custom-made cabinets. The shop is owned and operated by Jack Lambeth, a master cabinet maker. Even though it is not specifically listed in the case, it does seem that Mr. Lambeth has only a few employees other than himself and his son Jack Jr. As labor is an important part of cabinet-making, Mr. Lambeth does not like the idea
Rating:Essay Length: 1,372 Words / 6 PagesSubmitted: December 12, 2009 -
Production Quality
Summary: This article is about quality and how when not dealt with at a very high level can be extremely costly. They are costly to the entire organization from the cost of the recall, scrapped products, all the way to the brand equity and company reputation. They are expensive, and getting more expensive as companies are getting sued over manufacturing defects and such nowadays. It also goes on to tell us about how companies are
Rating:Essay Length: 421 Words / 2 PagesSubmitted: December 13, 2009 -
Spar Products Dbq
Question 1 The company in my district which I feel is most customer-centric would have to be my local food retailer, SPAR. This purely means that they have used a proven, tactical sales method that enables them to predictably generate more revenue without increasing sales costs. In focusing their activities and products on consumer demand they have managed to build many profitable and sustainable relationships with their customers. SPAR offers a 'Double Your Money Back
Rating:Essay Length: 1,442 Words / 6 PagesSubmitted: December 13, 2009 -
Nestle New Product Development Critique
1. Critique Nestle's new product development process for pasta and for pizza. Nestle's MRD was responsible for monitoring a product from the idea generation phase to the product launch step. The new product development processes consisted of 7 steps organized in a logical and sequential format which gives the MRD a clear direction for what is required for each product development cycle. Some of the key observations that can be made about their product development
Rating:Essay Length: 562 Words / 3 PagesSubmitted: December 14, 2009 -
What Makes Services Marketing More Challenging and Tough Than Product Marketing? Discuss
What makes Services Marketing more challenging and tough than product marketing? Discuss. Definition: Service Any act of performance that one party can offer another that is essentially intangible and does not result in the ownership of anything; its production may or may not be tied to a physical product. Dominant component is intangible. US is the world’s first service economy. More than % of the workforce in the private sector is employed in the service
Rating:Essay Length: 481 Words / 2 PagesSubmitted: December 16, 2009 -
The Toyota Production System
The Toyota Production System A Case Study of Creativity and Innovation in Automotive Engineering R.Balakrishnan INTRODUCTION Automobile Manufacturing Forty years ago, Peter Drucker dubbed it "the industries of industries." Today, automobile manufacturing is still the world's largest manufacturing activity. After First World War, Henry Ford and General Motors' Alfred Sloan moved world manufacture from centuries of craft production(led by European firms(into the age of mass production. Largely as a result, the United States soon dominated
Rating:Essay Length: 343 Words / 2 PagesSubmitted: December 18, 2009 -
Dakota office Products Study Case
1. Why was Dakota’s existing pricing system inadequate for its current operating environment? - profits only when clients placed large orders for cartons - real drop of profit if many clients place small orders - wrong cost determination for individual customers - wrong cost determination for new services provided by DOP (to small charges for the “desktop” delivery, then the actual cost of it) 2. Develop an activity-base cost system for Dakota Office Products based
Rating:Essay Length: 741 Words / 3 PagesSubmitted: December 18, 2009 -
Gross National Product
Gross National Product GNP Top 10 (2004) (currency exchange rate) Country GNP ($ mill) 1 United States 10,945,792 2 Japan 4,389,791 3 Germany 2,084,631 4 United Kingdom 1,680,300 5 France 1,523,025 6 China 1,417,301 7 Italy 1,242,978 8 Canada 6,770 9 Spain 698,208 10 Mexico 637,159 Gross National Product (GNP) is the total value of final goods and services produced in a year by domestically owned factors of production. Final goods are goods that are
Rating:Essay Length: 1,501 Words / 7 PagesSubmitted: December 21, 2009 -
Mass Production and the Beginnings of Scientific Management
How do Taylor and Scientific Management fit into the American business system of 100 years ago? American business environment of 100 years ago represents a period of transition in the organization of production pushed by increased competition, new technology, and growing consciousness of the potential of the factory. This situation was the inspiration of many people to find ways to improve organization and management to improve productivity. Those years were characterized by inefficient Rule of
Rating:Essay Length: 931 Words / 4 PagesSubmitted: December 21, 2009 -
Product Mix: Key to Winning the Cola War
Product Mix: Key to Winning the Cola War Pepsi and Coca-Cola have stood the test of time through one of the strongest competition rivalries ever seen in the business world. Each time that one of these beverage giants makes an innovative move to conquer a new or existing beverage market, the other is quick to respond with even better innovations or products. Through the years, each of these companies have heralded fabulous discoveries and absolute
Rating:Essay Length: 1,011 Words / 5 PagesSubmitted: December 22, 2009 -
Product Innovation
Assignment: Product Innovation (PIN) Value Proposition/Innovation "The Country Experience" By: Paul Rennie TABLE OF CONTENTS PAGE 1. Executive Summary 3 2. Justification and rationale 4 3. Research Methodology 5 3.1 Pre Situation 5 3.2 Findings-SWOT Analysis 6 4. Post Evaluation 8 4.1 Project Implementation 8 5 Project Management Techniques 12 5.1 Change Management 13 6. Discussion and Implications 14 7, Conclusion 19 8, References 22 9. Annexure A, B (Questionnaires) 23-28 Executive Summary Organisations today
Rating:Essay Length: 760 Words / 4 PagesSubmitted: December 25, 2009 -
Vernon’s Product Life-Cycle
1.0 Introduction The U.S. trade date of mid 20th century indicated that the U.S. was always an exporter of new products with a monopoly position initially, later overseas production began to displace American exports in some markets, and then foreign manufactured products became competitive in overseas markets, further reducing American exports, finally foreign goods were competitive in the U.S. (Louis&Wells, 1969). The trade flow was influenced by innovations and technical update along with the time
Rating:Essay Length: 3,025 Words / 13 PagesSubmitted: December 26, 2009 -
Mgt 449 Quality Management and Productivity
Disney Business Plan MGT/449 Quality Management and Productivity Overview After close examination of current cost, long wait in lines, safety for guest and employees, guest relations, and employee recruitment and retention the factors which influenced the level of planning needed to accomplish this growth within Disney will not only reveal Disney's effective business practices and tactics but will also highlight the strengths and weaknesses of this monolithic organization. Disney's outlook on planning, centers on their
Rating:Essay Length: 3,565 Words / 15 PagesSubmitted: December 26, 2009 -
Discuss the Impact of Digital Technology on the Production and Distribution of Music.
Over centuries past, music has seen leaps and bounds in the enhancement of theory, instruments, and recording arts. The first major leap was the invention of the piano in 1709 by Bartolomeo Cristofori. From that first major step came the introduction of electronic instruments short after the harnessing of electricity which came in the early 19th century. Soon after that came recording and then on to synthesizers and eventually digital recording. As computers were
Rating:Essay Length: 1,499 Words / 6 PagesSubmitted: December 26, 2009 -
Is a Company Able to Increase Brand Equity for a Product That Is in the Maturity Phase of the Plc?
A company is able to increase brand equity for a product that is in the maturity phase of the PLC. The maturity phase is characterized by increase competition, established brand recognition and slowing sales growth. In this phase product differentiation and market dominance become more critical (Anderson & Zeithaml, 1984). Brand equity is a set of brand assets and liabilities linked to a brand, its name, and symbol that add or subtract from the value
Rating:Essay Length: 1,123 Words / 5 PagesSubmitted: December 27, 2009 -
Acme Productions Human Dynamics Analysis
ACME PRODUCTIONS OVERVIEW Acme Productions is one of the largest independent, full service television and video production companies in the country. Acme Productions was founded in 1981 and originally headquartered in Northern Virginia until 1991 when it expanded to a custom designed building for television production located in Washington D.C. With a full time professional staff of over 70 employees, Acme Productions has grown over 220% since the recruitment of a new President & COO
Rating:Essay Length: 1,202 Words / 5 PagesSubmitted: December 27, 2009 -
Issue Paper: Need for Production of Ultra Low Sulfur Diesel Fuel at Citgo
Issue Paper: Need for Production of Ultra Low Sulfur Diesel (ULSD) Fuel at CITGO Introduction The U.S. Environmental Protection Agency (EPA) has issued new standards regarding diesel fuel to improve air quality. The petroleum industry must start producing Ultra Low Sulfur Diesel (ULSD) fuel in order to meet these standards. ULSD is a cleaner burning diesel fuel than others, comprising of a maximum of 15 parts-per-million (ppm) sulfur. Most of the highway diesel fuel created
Rating:Essay Length: 2,336 Words / 10 PagesSubmitted: December 27, 2009 -
Tylenol Product Contamination Case Study
Tylenol Product Contamination case study “The risks and rewards to organizations of openness are illustrated by recent cases of crisis management run amuck and done well by highly visible corporations. In the 1980’s, Johnson and Johnson created the case study benchmark for crisis management with its handling of the Tylenol product contamination issue. Highly visible leadership and wide-open communication allowed the company to quickly rebuild customer trust in the Tylenol brand” (Patrick F. Bassett) Long-Term
Rating:Essay Length: 563 Words / 3 PagesSubmitted: December 28, 2009